Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC
DIS109
Message Unable to start the AutoConfig file import operation, because an invalid End Host
Power State value is specified in the DHCP scope option field where the
VendorID=iDRAC.
Detailed
Description
The server could not be configured because the End Host Power State value
specified in the DHCP scope option field where the VendorID=iDRAC is incorrect.
Recommended
Response
Action
In the DHCP scope option field where VendorID=iDRAC, enter a end-host-power-
state (-e <0 or 1>) where 0 = Powered Off and = Powered On, and then retry the
operation.
Category Configuration (DIS = Auto-Discovery)
Severity Severity 3 (Informational)
Trap/EventID 10635
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC
DIS110
Message The AutoConfig operation is completed.
Detailed
Description
The AutoConfig operation is completed.
Recommended
Response
Action
No response action is required
Category Configuration (DIS = Auto-Discovery)
Severity Severity 3 (Informational)
Trap/EventID 10635
476