Reference Guide

Detailed
Description
Unable to start the AutoConfig file import operation, because an invalid AutoConfig
time-to-wait value is specified in the DHCP scope option field where the
VendorID=iDRAC.
Recommended
Response
Action
In the DHCP scope option field where VendorID=iDRAC, enter a time-to-wait (-t)
value more than 300 seconds and less than 3600 seconds and then retry the
operation.
Category Configuration (DIS = Auto-Discovery)
Severity Severity 3 (Informational)
Trap/EventID 10635
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC
DIS108
Message Unable to start the AutoConfig import operation, because Lifecycle Controller is
not enabled.
Detailed
Description
The server could not be successfully configured, because Lifecycle Controller is
either not installed or not enabled.
Recommended
Response
Action
Verify that the Lifecycle Controller firmware on the server being configured is
installed and enabled, then restart the iDRAC by pressing the System ID button for
15 seconds. For more information about Lifecycle Controller, see the Lifecycle
Controller Users Guide available at dell.com/support/manuals.
Category Configuration (DIS = Auto-Discovery)
Severity Severity 3 (Informational)
Trap/EventID 10635
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔
CMC
475