Reference Guide

Arguments arg1 = progress message
Detailed
Description
The Auto Discovery process has encountered a problem. One of the following
messages will be displayed on the LCD display and entered in the LC log: 1) No
credentials returned, 2) Blocked Because Admin Account Enabled, 3) Blocked
Because IPv6 Enabled, 4) No IP on NIC, 5) No provisioning server found, 6)
Provisioning server is unreachable/invalid address, 7) SSL connection failed no
service at IP/port, 8) SSL connection refused, 9) SSL connection failed (Server
authentication), 10) SSL connection failed (client authentication), 11) SSL
connection failed other, 12) SOAP failure, 13) Failed to create account, 14) Blocked
Because Active Directory Enabled, 15) No Service Tag, and 16) Unknown.
Recommended
Response
Action
Refer to Lifecycle Controller Remote Services Users Guide for additional
information for LCD messages.
Category Configuration (DIS = Auto-Discovery)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
DIS011
Message Auto Discovery client using customer signed client certificate.
Detailed
Description
Customer provided client certificate is being used. Auto Discovery client is using
this certificate for the SSL connection with the Provisioning Server.
Recommended
Response
Action
No response action is required.
Category Configuration (DIS = Auto-Discovery)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
467