Reference Guide

DIAG8611
Message User reported not hearing speaker tone
Detailed
Description
Recommended
Response
Action
If the beep was not heard, verify the internal speakers are connected properly. On
some systems, internal speakers are a purchased option. For a given system, if the
speaker is optional, it might not exist on that system. If audio is not heard, make
sure to unplug anything plugged into an external headphone jack and rerun the
test. External HP jacks can mute the internal speakers at the hardware level.
Category System Health (DIAG = Diagnostic)
Severity Severity 3 (Informational)
No alerts are applicable for this message
461