Reference Guide

DIAG8156
Message Tape Drive arg1 - S/N arg2 , no media, cannot test drive.
Arguments arg1 = Drive Location, arg2 = Serial Number
Detailed
Description
Testing requires scratch tape media.
Recommended
Response
Action
Install tape media or skip test.
Category Storage (DIAG = Diagnostic)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
DIAG8157
Message arg1 Drive arg2 - S/N arg3 , drive is not a supported drive.
Arguments arg1 = Tape|Disk, arg2 = Drive Location, arg3 = Serial Number
Detailed
Description
If <Tape> then only Dell tape drives are tested and supported. If <Disk> then disk
drive may not be a Dell drive.
Recommended
Response
Action
Customer appears to have added a non-Dell Tape drive to his system.
Category Storage (DIAG = Diagnostic)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
457