Reference Guide

DIAG0314
Message Thermal: The ( arg1 ) reading ( arg2 C) exceeds the thermal limit.
Arguments arg1 = Sensor Name, arg2 = Degrees
Detailed
Description
Recommended
Response
Action
Check the event log for thermal events, including defective fans and defective
sensors. Inspect the system for clogged or obstructed air vents. Make sure that the
BIOS is current and rerun the diagnostics.
Category System Health (DIAG = Diagnostic)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
DIAG0315
Message Sensor: The ( arg1 ) reading arg2 C) is lower than expected.
Arguments arg1 = Sensor Name, arg2 = Degrees
Detailed
Description
Recommended
Response
Action
Check the event log for thermal events, including defective fans and defective
sensors. Inspect the system for clogged or obstructed air vents. Make sure that the
BIOS is current and rerun the diagnostics.
Category System Health (DIAG = Diagnostic)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
436