Reference Guide

Recommended
Response
Action
Make sure the BIOS is current and retry the diagnostics.
Category System Health (DIAG = Diagnostic)
Severity Severity 1 (Critical)
No alerts are applicable for this message
DIAG0235
Message PM timer 1 had wrong time period. Expected arg1 , Actual arg2 .
Arguments arg1 = Decimal, arg2 = Decimal
Detailed
Description
Recommended
Response
Action
Category System Health (DIAG = Diagnostic)
Severity Severity 1 (Critical)
No alerts are applicable for this message
DIAG0241
Message BIOS - A20 gate not enabled.
Detailed
Description
Recommended
Response
Action
Make sure the BIOS is current and retry the diagnostics.
Category System Health (DIAG = Diagnostic)
Severity Severity 2 (Warning)
No alerts are applicable for this message
DIAG0242
Message System board - Interrupt controller, IRQ = arg1 : arg2 not detected.
Arguments arg1 = Decimal, arg2 = IRQ Description
Detailed
Description
433