Reference Guide

Recommended
Response
Action
Replace the battery.
Category System Health (DIAG = Diagnostic)
Severity Severity 2 (Warning)
No alerts are applicable for this message
DIAG0133
Message Battery - The battery cannot provide sufficient power.
Detailed
Description
Recommended
Response
Action
Check battery contacts, plugs and cables. May need to replace battery.
Category System Health (DIAG = Diagnostic)
Severity Severity 1 (Critical)
No alerts are applicable for this message
DIAG0141
Message Hard Drive - No Hard Drive detected.
Detailed
Description
Recommended
Response
Action
Hard drives are not required on all systems so this message is usually a warning.
Desktops and Servers: If the system has a hard disk, power down system and check
the signal and power connections to it. Rerun the diagnostic.If no error occurs
then it was a cable or connector issue.
Category Storage (DIAG = Diagnostic)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
424