Reference Guide

Severity Severity 3 (Informational)
No alerts are applicable for this message
DIAG0122
Message Memory errors detected. Limit exceeded. Additional errors will not be resolved.
Detailed
Description
Recommended
Response
Action
MemRx is enabled and detected too many errors for safe resolution. Recommend
DIMM replacement.
Category System Health (DIAG = Diagnostic)
Severity Severity 1 (Critical)
No alerts are applicable for this message
DIAG0123
Message UEFI: Memory error detected. :OR: LEGACY: Memory - integrity test discrepancy.
Detailed
Description
Recommended
Response
Action
MemRX not enabled or not supported. Servers UEFI: Power down system and re-
seat DIMMS. Retry test and if no error occurs it was a DIMM connection issue.
Client LEGACY: Power down system and re-seat DIMMS. Retry test and if no error
occurs it was a DIMM connection issue. Check for latest BIOS.
Category System Health (DIAG = Diagnostic)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
DIAG0124
Message arg1 , arg2
421