Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC
CBL0003
Message Backplane arg1 arg2 cable is disconnected.
Arguments arg1 = bay ID, arg2 = cable name
Detailed
Description
The backplane cable identified in the message is disconnected or no cable is
detected.
Recommended
Response
Action
Reconnect or replace the cable identified in the message. If the issue persists,
contact your service provider.
Category System Health (CBL = Cable)
Severity Severity 1 (Critical)
Trap/EventID 2393
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔ ✔
CMC ✔ ✔ ✔
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔ ✔
CMC ✔* ✔ ✔*
CBL0004
Message The arg1 cable is incorrectly connected to backplane arg2 connector arg3 .
Arguments arg1 = cable name, arg2 = bay ID, arg3 = connector name
Detailed
Description
The cable identified in the message is incorrectly connected to the backplane
connector.
Recommended
Response
Action
Make sure the cable identified in the message is cabled correctly. If the issue
persists, contact your service provider.
Category System Health (CBL = Cable)
Severity Severity 1 (Critical)
268