Reference Guide

BOOT016
Message Input source argument value for the boot device is incorrect or not found among
the boot devices on the system.
Detailed
Description
The input source argument value referring to the boot device is incorrect or empty.
The boot device identifier must match the InstanceID for the BootSourceSetting
instance that represents the boot device.
Recommended
Response
Action
Use the correct source argument value for the boot device and retry the operation.
Category Configuration (BOOT = BOOT Control)
Severity Severity 2 (Warning)
No alerts are applicable for this message
BOOT017
Message Source argument does not support enable or disable mode.
Detailed
Description
The boot device(s) specified in the source argument used in the operation cannot
be enabled or disabled. This behavior applies to BCV devices and one-time boot.
Recommended
Response
Action
Refer to the documentation on validity of operation for the boot device specified.
For more information on the operation, see Lifecycle Controller-Remote Services
documentation.
Category Configuration (BOOT = BOOT Control)
Severity Severity 2 (Warning)
No alerts are applicable for this message
BOOT018
Message Specified Boot Control List is read-only
Detailed
Description
The Boot Control List specified in the operation is read-only and cannot be
modified.
Recommended
Response
Action
Refer to the documentation on validity of operation for the Boot Control List
specified. For more information on the operation, see Lifecycle Controller-Remote
Services documentation.
Category Configuration (BOOT = BOOT Control)
Severity Severity 2 (Warning)
No alerts are applicable for this message
265