Reference Guide

VFL0705
Message Error occurred and SD card could not be initialized.
Detailed
Description
An error has occurred while initializing the SD card. The SD card is not present or
vFlash is not enabled, or the SD card is write-protected.
Recommended
Response
Action
Re-insert the SD card, enable the SD card, or disable write-protection on the SD
card. Then try to initialize the SD card again.
Category Configuration (VFL = vFlash Event)
Severity Severity 1 (Critical)
No alerts are applicable for this message
VFL0708
Message SD card is busy with another operation and could not be initialized.
Detailed
Description
none
Recommended
Response
Action
Retry after a few minutes.
Category Configuration (VFL = vFlash Event)
Severity Severity 1 (Critical)
No alerts are applicable for this message
VFL0710
Message vFlash is not enabled; the SD card could not be initialized.
Detailed
Description
none
Recommended
Response
Action
Enable vFlash and try again.
Category Configuration (VFL = vFlash Event)
Severity Severity 1 (Critical)
No alerts are applicable for this message
2339