Reference Guide

VFL0021
Message One of the vFlash SD Card partitions is already attached to the host operating
system.
Detailed
Description
The requested operation cannot be performed if one of the vFlash SD cards is in an
attached state.
Recommended
Response
Action
Detach the vFlash SD Card partitions by running the racadm command "racadm set
iDRAC.vflashpartition.<partition number>.attachstate 0". and retry the operation.
Category System Health (VFL = vFlash Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
VFL0703
Message The SD card initialization was successful.
Detailed
Description
None
Recommended
Response
Action
No response action is required.
Category Configuration (VFL = vFlash Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
VFL0704
Message SD card is not present and could not be initialized.
Detailed
Description
None
Recommended
Response
Action
Insert the SD card and try again.
Category Configuration (VFL = vFlash Event)
Severity Severity 1 (Critical)
No alerts are applicable for this message
2338