Reference Guide

VFL0015
Message vFlash media partition is of read-only type.
Detailed
Description
The request could not be successfully completd, because the vFlash SD Card
partition is in read-only mode. Write operations cannot be performed on the card
partition.
Recommended
Response
Action
Change the partition access type to read-write by running the command racadm
set idrac.vFlashPartition.<index>.accesstype 1.
Category Configuration (VFL = vFlash Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
VFL0016
Message vFlash media partition is already in attached state.
Detailed
Description
The requested vFash media partition is already attached to the host operating
system.
Recommended
Response
Action
No response action is required.
Category Configuration (VFL = vFlash Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
VFL0017
Message Unable to perform the vFlash media operation because the vFlash media partition is
corrupted.
Detailed
Description
The file system on the specified vFlash media partition could not be recognized.
Data on the partition may be corrupted.
Recommended
Response
Action
Format the vFlash SD Card using the racadm vflashsd initialize command and retry
the operation.
Category System Health (VFL = vFlash Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
2336