Reference Guide

VF004
Message Invalid value for the parameter: arg1
Arguments arg1 = parameter name
Detailed
Description
The value of the input parameter identified in the message is not a valid value.
Recommended
Response
Action
Refer the iDRAC and Lifecycle Controller User Guides for the required input
parameters for this method.
Category Configuration (VF = vFlash Media)
Severity Severity 2 (Warning)
No alerts are applicable for this message
VF005
Message Empty partition creation successful
Detailed
Description
A partition with no image was created.
Recommended
Response
Action
No response action is required.
Category Configuration (VF = vFlash Media)
Severity Severity 3 (Informational)
No alerts are applicable for this message
VF006
Message Empty partition creation failed
Detailed
Description
Creating a partition without image failed.
Recommended
Response
Action
Do one of the following: 1) Rerun the command after about 2 minutes 2) Reset
iDRAC and rerun the command.
Category Configuration (VF = vFlash Media)
Severity Severity 1 (Critical)
No alerts are applicable for this message
2315