Reference Guide

VF Event Messages
VF001
Message Command successful.
Detailed
Description
The command was successful
Recommended
Response
Action
No response action is required.
Category Configuration (VF = vFlash Media)
Severity Severity 3 (Informational)
No alerts are applicable for this message
VF002
Message General failure
Detailed
Description
The operation did not complete successfully because of an internal issue with the
firmware.
Recommended
Response
Action
Do one of the following: 1) Rerun the command after about 2 minutes 2) Reset
iDRAC and rerun the command.
Category Configuration (VF = vFlash Media)
Severity Severity 1 (Critical)
No alerts are applicable for this message
VF003
Message Missing required parameter: arg1
Arguments arg1 = parameter name
Detailed
Description
The required input parameter identified in the message is missing.
Recommended
Response
Action
Refer the iDRAC and Lifecycle Controller User Guides for the required input
parameters for this method.
Category Configuration (VF = vFlash Media)
Severity Severity 2 (Warning)
No alerts are applicable for this message
2314