Reference Guide

VDR Event Messages
VDR1
Message arg1 failed.
Arguments arg1 = VD Name
Detailed
Description
A storage component such as a physical disk or an enclosure has failed. The failed
component may have been identified by the controller while performing a task
such as a rescan or a check consistency.
Recommended
Response
Action
Replace the failed component. You can identify which component has failed by
locating the component that has a red "X" for its status. Perform a rescan after
replacing the failed component.
Category Storage (VDR = Virtual Disk)
Severity Severity 1 (Critical)
Trap/EventID 4353
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔ ✔
CMC ✔ ✔* ✔ ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC ✔ ✔* ✔
VDR10
Message Formatting the arg1 has started.
Arguments arg1 = VD Name
Detailed
Description
This alert is provided for informational purposes.
Recommended
Response
Action
No response action is required.
Category Storage (VDR = Virtual Disk)
Severity Severity 3 (Informational)
Trap/EventID 4355
OMSA Event ID 2059
2260