Reference Guide

Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
UEFI0272
Message Unable to perform iSCSI boot on connection arg1 because the BIOS cannot obtain
the initiator information from DHCPv4 server.
Arguments arg1 = number
Detailed
Description
Unable to perform iSCSI boot on the connection identified in the message because
the BIOS cannot obtain the initiator information from DHCPv4 server.
Recommended
Response
Action
Do one of the following: 1) Check the configuration of DHCPv4 server. 2) Go to
System Setup > Network Settings > iSCSI Device Settings > Connection Settings
page, disable DHCP and configure the initiator information manually. Retry the
operation.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
UEFI0273
Message Unable to perform iSCSI boot on connection arg1 because the iSCSI target
configuration data obtained from DHCPv4 server is invalid.
Arguments arg1 = number
Detailed
Description
Unable to perform iSCSI boot on the connection identified in the message because
the iSCSI target configuration data obtained from DHCPv4 server is invalid.
Recommended
Response
Action
Do one of the following: 1) Reconfigure the DHCPv4 server root path option, and
note that server name must be speicfied. 2) Go to System Setup > Network Settings
> iSCSI Device Settings > Connection Settings page, disable Target Info via DHCP
and configure the parameters manually. Retry the operation.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
UEFI0274
Message Unable to perform iSCSI boot on connection arg1 because the iSCSI login
operation did not complete successfully.
Arguments arg1 = number
2227