Reference Guide

UEFI0269
Message Unable to perform iSCSI boot on connection arg1 because the iSCSI target IP
address is invalid.
Arguments arg1 = number
Detailed
Description
Unable to perform iSCSI boot on the connection identified in the message because
the iSCSI target IP address is invalid.
Recommended
Response
Action
Go to System Setup > Network Settings > iSCSI Device Settings > Connection
Settings page, do the following: 1) Make sure the Target IP Address is set
correspoding to the mode enabled (IPv4/IPv6). 2) Make sure there is no
typographical error in the Target IP Address field. 3) Retry the operation.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
UEFI0270
Message Unable to perform iSCSI boot on connection arg1 because the network connection
to DHCPv4 server is not established.
Arguments arg1 = number
Detailed
Description
Unable to perform iSCSI boot on the connection identified in the message because
the network connection to DHCPv4 server is not established.
Recommended
Response
Action
Check the network cable connection of the initiator or the DHCPv4 server and
retry the operation.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
UEFI0271
Message Unable to perform iSCSI boot on connection arg1 because the network connection
to DHCPv6 server is not established.
Arguments arg1 = number
Detailed
Description
Unable to perform iSCSI boot on the connection identified in the message because
the network connection to DHCPv6 server is not established.
Recommended
Response
Action
Check the network cable connection of the initiator or the DHCPv6 server and
retry the operation.
2226