Reference Guide

Detailed
Description
Unable to perform iSCSI boot on the connection identified in the message because
the iSCSI initiator IPv4 subnet mask address is invalid.
Recommended
Response
Action
Go to System Setup > Network Settings > iSCSI Device Settings page, make sure
there is no typographical error in the Initiator Subnet Mask field, and retry the
operation.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
UEFI0267
Message Unable to perform iSCSI boot on connection arg1 because the IPv4 initiator
gateway address is invalid.
Arguments arg1 = number
Detailed
Description
Unable to perform iSCSI boot on the connection identified in the message because
the IPv4 initiator gateway address is invalid.
Recommended
Response
Action
Go to System Setup > Network Settings > iSCSI Device Settings page, make sure
there is no typographical error in the Initiator Gateway field, and retry the
operation.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
UEFI0268
Message Unable to perform iSCSI boot on connection arg1 because the iSCSI target name is
invalid.
Arguments arg1 = number
Detailed
Description
Unable to perform iSCSI boot on the connection identified in the message because
the iSCSI target name is invalid.
Recommended
Response
Action
Go to System Setup > Network Settings > iSCSI Device Settings > Connection
Settings page, make sure the iSCSI Target Name in the iSCSI setup page is correct,
and retry the operation.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
2225