Reference Guide

Recommended
Response
Action
Check the network cable connection of the system and retry the operation.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
UEFI0264
Message Unable to perform iSCSI boot because the iSCSI initiator name is invalid.
Detailed
Description
Unable to perform iSCSI boot because the iSCSI initiator name is invalid.
Recommended
Response
Action
Go to System Setup > Network Settings page, make sure there is no typographical
error in the iSCSI Initiator Name field, and retry the operation.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
UEFI0265
Message Unable to perform iSCSI boot on connection arg1 because the iSCSI initiator IPv4
address is invalid.
Arguments arg1 = number
Detailed
Description
Unable to perform iSCSI boot on the connection identified in the message because
the iSCSI initiator IPv4 address is invalid.
Recommended
Response
Action
Go to System Setup > Network Settings > iSCSI Device Settings page, make sure
there is no typographical error in the Initiator IP address field, and retry the
operation.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
UEFI0266
Message Unable to perform iSCSI boot on connection arg1 because the iSCSI initiator IPv4
subnet mask address is invalid.
Arguments arg1 = number
2224