Reference Guide

Recommended
Response
Action
Do the following: 1) Remove input power to the system, 2) Reseat the memory riser
and 3) Restart the system. For more information, see the platform Owners Manual.
Category System Health (UEFI = UEFI Event)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
UEFI0242
Message Unable to enable the requested Partial Mirror size of arg1 GB due to the current
DIMM population or hardware configuration does not support the requested size.
arg2 GB was allocated instead.
Arguments arg1 = requested memory size, arg2 = allocated memory size
Detailed
Description
The Partial Memory Mirroring feature cannot be enabled because the current
DIMM population or hardware configuration does not support the requested size.
Recommended
Response
Action
Check the DIMM population and hardware configuration to make sure the
requested Partial Mirror size can be supported. For more information, see platform
Owners Manual.
Category System Health (UEFI = UEFI Event)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
2214