Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
UEFI0170
Message Unable to configure memory interleaving on DIMM modules on memory slots:
arg1 .
Arguments arg1 = slot numbers
Detailed
Description
Memory could not be interleaved because of an attempt to simultaneously
configure incompatible A7 mode and Target Address Decode (TAD) 3-way
interleave during memory initialization.
Recommended
Response
Action
Check the DIMM population and hardware configuration to make sure interleaving
can be supported. For more information, see the platform Owners Manual.
Category Configuration (UEFI = UEFI Event)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
UEFI0171
Message A Dual Rank DIMM module is installed on memory slot arg1 after a Single Rank
DIMM module.
Arguments arg1 = slot number
Detailed
Description
A memory population violation has been detected on the identified DIMM slot.
2173