Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
UEFI0168
Message Unable to configure memory interleaving on DIMM modules on memory slots:
arg1 .
Arguments arg1 = slot numbers
Detailed
Description
Memory could not be interleaved because a negative Target Address Decode (TAD)
offset was calculated during memory initialization.
Recommended
Response
Action
Check the DIMM population and hardware configuration to make sure interleaving
can be supported. For more information, see the platform Owners Manual.
Category Configuration (UEFI = UEFI Event)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
UEFI0169
Message Unable to configure memory interleaving on DIMM modules on memory slots:
arg1 .
Arguments arg1 = slot numbers
Detailed
Description
Memory could not be interleaved because low memory (i.e. memory below the
4GB boundary) cannot be split evenly across processor sockets during memory
initialization.
Recommended
Response
Action
Check the DIMM population and hardware configuration to make sure interleaving
can be supported. For more information, see the platform Owners Manual.
Category Configuration (UEFI = UEFI Event)
Severity Severity 1 (Critical)
2172