Reference Guide

UEFI0134
Message Unable to allocate Memory Mapped Input Output (MMIO) resources for one or
more PCIe devices because of insufficient MMIO memory.
Detailed
Description
Unable to allocate Memory Mapped Input Output (MMIO) resources for one or
more PCIe devices because of insufficient MMIO memory.
Recommended
Response
Action
Do one of the following: 1) Remove unused PCIe card(s) to free up MMIO space. 2)
Go to System Setup and enable the Memory Mapped I/O above 4GB option.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
UEFI0135
Message Unable to execute CSIOR (Collect System Inventory on Restart) because the
Lifecycle Controller (LC) firmware was not accessible.
Detailed
Description
The CSIOR (Collect System Inventory on Restart) operation cannot be executed
because the Lifecycle Controller (LC) firmware was not accessible. This issue is
caused by LC partition attach issues.
Recommended
Response
Action
Do one of the following: 1) Restart the system and retry the operation. 2) Update
the iDRAC firmware. If the issue persists, contact your service provider.
Category System Health (UEFI = UEFI Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
2153