Reference Guide

Recommended
Response
Action
Go to the System Setup to set the current time and date.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
UEFI0131
Message Unable to load one or more option ROMs because of insufficient shadow memory.
Detailed
Description
Unable to load one or more option ROMs because of insufficient shadow memory.
The option ROM shadow memory is located between C0000h and F0000h.
Recommended
Response
Action
Do one of the following: 1) Remove unused PCIe card(s) to free up option ROM
space. 2) Disable unused boot protocol instances (such as PXE, iSCSI, etc.) from
applicable PCIe card(s) option ROM configurations. 3) If possible, install and run the
Operating System in UEFI boot mode.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
UEFI0132
Message Unable to load one or more option ROMs because of insufficient base memory.
2151