Reference Guide

Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
UEFI0114
Message Unable to enable the Fault Resilient Memory (FRM) operating mode because of
mismatches in DIMM channel configurations.
Detailed
Description
The Fault Resilient Memory (FRM) operating mode cannot be enabled because of
mismatches in DIMM channel configurations.
Recommended
Response
Action
Make sure identical memory modules in corresponding slots of channel pairs are
populated. For more information, see the platform Owners Manual.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
UEFI0115
Message The Management Engine firmware has recovered from one or more correctable
errors.
Detailed
Description
The BIOS has recovered the Management Engine after it became unresponsive via
the HECI interface. There is no performance degradation and the Management
Engine is functioning normally now.
2142