Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
UEFI0101
Message Total amount of installed memory has exceeded limit.
Detailed
Description
The total amount of installed memory has exceeded the amount supported by the
platform.
Recommended
Response
Action
Remove memory modules from the system to reduce the total amount of installed
memory. For more information on installed memory limit, see the platform Owners
Manual.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
UEFI0102
Message Unable to enable the Memory Sparing feature because the current DIMM
population or hardware configuration does not support the feature.
Detailed
Description
The Memory Sparing feature cannot be enabled because the current DIMM
population or hardware configuration does not support the feature.
Recommended
Response
Action
Check the DIMM population and hardware configuration to make sure Memory
Sparing feature can be supported. For more information, see the platform Owners
Manual.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
2135