Reference Guide

UEFI0048
Message The Collect System Inventory on Restart (CSIOR) operation is not performed during
this restart because Lifecycle Controller is not functioning.
Detailed
Description
The Collect System Inventory on Restart (CSIOR) operaiton is not performed during
this restart because Lifecycle Controller firmware could not be accessed or run
properly.
Recommended
Response
Action
Repair Lifecycle Controller using the Update Package. For more information, see
the Lifecycle Controller Users Guide.
Category System Health (UEFI = UEFI Event)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
UEFI0049
Message Unable to enable the Non-maskable Interrupt (NMI) button because either the NMI
button is stuck or iDRAC firmware is not updated.
Detailed
Description
The NMI button cannot be enabled because either the NMI button is stuck or
iDRAC firmware is not updated.
Recommended
Response
Action
Correct the NMI button if stuck or update iDRAC firmware on the system.
Category System Health (UEFI = UEFI Event)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
2106