Reference Guide

Recommended
Response
Action
Remove input power from the system, wait for 30 seconds, and re-apply input
power. Turn on the system.
Category System Health (UEFI = UEFI Event)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
UEFI0029
Message Unable to initialize iDRAC because of some critical issues.
Detailed
Description
iDRAC could not be initialized because of some critical issues. Continuing to boot
may result in unexpected power loss because of unknown power inventory and
unavailability of features such as remote out of band access, active power
management, thermal management, inventory collection, LCD, or system error
reporting.
Recommended
Response
Action
Do one of the following: 1) Remove input power from the system, wait for 30
seconds, and re-apply input power. Turn on the system. 2) Update the iDRAC
firmware. 3) Continue to boot. Note: This may result in unexpected power loss
because of unknown power inventory and unavailability of features such as remote
out of band access, active power management, thermal management, inventory
collection, LCD, or system error reporting.
Category System Health (UEFI = UEFI Event)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
2095