Reference Guide

TST103
Message Missing parameters arg1
Arguments arg1 = parameter names
Detailed
Description
One or more required parameters needed for the operation are missing.
Recommended
Response
Action
To provide the correct parameters, see Lifecycle Controller-Remote Services
documentation.
Category Configuration (TST = Test Alert)
Severity Severity 2 (Warning)
No alerts are applicable for this message
TST104
Message SNMP traps not configured.
Detailed
Description
The SNMP trap being tested is not properly configured.
Recommended
Response
Action
Configure the SNMP trap and retry the operation. If the issue persists, reset iDRAC.
Category Configuration (TST = Test Alert)
Severity Severity 2 (Warning)
No alerts are applicable for this message
TST105
Message Invalid parameter value for arg1 .
Arguments arg1 = parameter name
Detailed
Description
The value provided for the specified parameter is invalid.
Recommended
Response
Action
To provide the correct value for the specified parameter, see Lifecycle Controller-
Remote Services documentation.
Category Configuration (TST = Test Alert)
Severity Severity 2 (Warning)
No alerts are applicable for this message
2079