Reference Guide

TMP505
Message The arg1 sensor has failed with a value of arg2 degrees Celsius.
Arguments arg1 = sensor name, arg2 = temperature
Detailed
Description
The temperature sensor identified in the message has failed.
Recommended
Response
Action
Verify the Embedded System Management (ESM) Log for any sensor related faults.
If there is a failed sensor, replace the system board. For more information, contact
your service provider.
Category System Health (TMP = Temperature)
Severity Severity 1 (Critical)
OMSA Event ID 5055
OMSA Trap ID 5055
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔* ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
TMP6
Message The temperature probe minimum warning value was changed on arg1 .
Arguments arg1 = Enclosure name
Detailed
Description
You have changed the value for the minimum temperature probe warning
threshold. This alert is provided for informational purposes.
Recommended
Response
Action
No response action is required.
Category Storage (TMP = Temperature)
Severity Severity 3 (Informational)
Trap/EventID 4211
OMSA Event ID 2155
OMSA Trap ID 105100
2071