Reference Guide

TMP1003
Message arg1 has crossed the minimum failure threshold.
Arguments arg1 = tempsensor name
Detailed
Description
The enclosure is too cold.
Recommended
Response
Action
Check whether the thermostat setting is too low and whether the room
temperature is too cool.
Category Storage (TMP = Temperature)
Severity Severity 1 (Critical)
Trap/EventID 4209
OMSA Event ID 2103
OMSA Trap ID 105400
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔ ✔
CMC ✔ ✔* ✔ ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC ✔ ✔*
TMP1004
Message The temperature sensor arg1 is now within configured threshold values.
Arguments arg1 = temperature sensor name
Detailed
Description
The enclosure temperature sensor identified in the message is operating within the
upper and lower configured temperature thresholds.
Recommended
Response
Action
No response action is required.
Category Storage (TMP = Temperature)
Severity Severity 3 (Informational)
Trap/EventID 4211
2066