Reference Guide

Recommended
Response
Action
Make sure the entered sharetype, sharename, IP address, username and password
are valid and retry the operation. The network share connectivity can be tested by
using the Test Network Connection feature of the iDRAC.
Category System Health (SYS = System Info)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SYS175
Message Unable to find a device configuration for the FQDD entered.
Detailed
Description
Selective Export / Import could not find any matches for the FQDDs specified.
Recommended
Response
Action
Make sure that only valid FQDDs are entered as input to the Target parameter, and
then retry the operation
Category Configuration (SYS = System Info)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SYS177
Message There was an issue retrieving Hardware data.
Detailed
Description
There was an issue retrieving Hardware data from the iDRAC internal storage. This
may be because Collect System Inventory on Restart (CSIOR) feature is disabled
and has never executed or the iDRAC Remote Services API status may not be in the
Ready state.
Recommended
Response
Action
Make sure the Collect System Inventory on Restart (CSIOR) is enabled and has run
at least once before retrying this operation. For remote web services API access,
make sure the GetRemoteServicesAPIStatus method returns Ready status before
trying this operation. If the issue persists, reset iDRAC and retry the operation.
Category System Health (SYS = System Info)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SYS178
Message Unable to retrieve TTY log data because no storage controllers are detected in the
server.
Detailed
Description
Unable to retrieve TTY log data because no storage controllers are detected in the
server.
2030