Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
SYS151
Message Completed System Erase Job ID: arg1
Arguments arg1 = job ID
Detailed
Description
A System Erase job with the job ID identified in the message is completed.
Recommended
Response
Action
No response action is required.
Category Configuration (SYS = System Info)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
SYS152
Message Erase operations for some System Erase tasks did not complete successfully.
Detailed
Description
Some of the requested storage component erase tasks were not successful.
Retrying the System Erase operation may be required. The vFlash SD Card must be
initialized and licensed to be erased successfully.
Recommended
Response
Action
Retry the System Erase operation. To retry the System Erase operation using the
Lifecycle Controller utility, restart the server and when the company logo is
displayed, press <F10>. Select Hardware Configuration > Retire or Repurpose
System, check appropriate storage options, and then retry the operation.
2019