Reference Guide

Recommended
Response
Action
Retry the Update operation. If the issue persists, reinsert the iKVM and retry the
operation.
Category Updates (SWU = Software Change)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
SWU8540
Message Unable to update the PSU firmware, because the transfer of Image file is not
successful. ErrorCode=0x arg1 .
Arguments arg1 = error no
Detailed
Description
The PSU firmware update operation was not successful, because the firmware
Image file could not be transferred.
Recommended
Response
Action
Make sure that the PSU firmware image file is available at the location specified in
the operation, and then retry the operation.
Category Updates (SWU = Software Change)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
1936