Reference Guide

SWU8533
Message Unable to update the LKVM firmware, because the target is not ready.
ErrorCode=0x arg1 .
Arguments arg1 = error no
Detailed
Description
The LKVM firmware update operation is not successful, because the target is not
ready.
Recommended
Response
Action
Wait for the target to become ready. This may take a few minutes. After the target
is ready, then retry the operation.
Category Updates (SWU = Software Change)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
SWU8534
Message Unable to update the iKVM firmware.
Detailed
Description
The iKVM firmware update operation is not successful.
Recommended
Response
Action
Reacquire the Image file from the source location, and then retry the operation.
Category Updates (SWU = Software Change)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
1933