Reference Guide

SWU8517
Message Unable to update the iDRAC firmware on the server in slot arg1 . The Image file is
not accessible. ErrorCode=0x arg2 .
Arguments arg1 = slot number, arg2 = error no
Detailed
Description
Unable to update the iDRAC firmware. The firmware Image file is not accessible.
Recommended
Response
Action
Make sure the iDRAC firmware Image file is available in the given path and retry the
operation.
Category Updates (SWU = Software Change)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
SWU8518
Message The firmware update operation on the iDRAC on the server in slot arg1 is stopped.
Arguments arg1 = slot number
Detailed
Description
The server was pulled out from the chassis during the iDRAC firmware update
operation.
Recommended
Response
Action
Reinsert the server and retry the operation. If the issue persists, contact your
service provider.
Category Updates (SWU = Software Change)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
1924