Reference Guide

SWU Event Messages
SWU001
Message The expander or storage enclosure processor firmware is successfully updated.
Detailed
Description
The expander or storage enclosure processor firmware is successfully updated.
Recommended
Response
Action
No response action is required.
Category Storage (SWU = Software Change)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SWU002
Message The backplane firmware update did not complete successfully.
Detailed
Description
The expander or storage enclosure processor firmware update did not complete
successfully.
Recommended
Response
Action
Check the Storage Enclosure Backplane type and the Firmware version and make
sure they are appropriately matched, and then retry the operation. For more
information, see the platform Owners Manual
Category Storage (SWU = Software Change)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SWU8500
Message The arg1 request to Lifecycle Controller on server arg2 was not successful.
Arguments arg1 = update/reinstall/rollback, arg2 = slot number
Detailed
Description
This message is displayed when: 1. A reboot job is unable to provide a valid reboot
ID. 2. The WSMAN command to set up a job queue on Lifecycle Controller was not
successful.
Recommended
Response
Action
Retry the operation. If the error persists, contact your service provider.
Category Updates (SWU = Software Change)
Severity Severity 2 (Warning)
1917