Reference Guide

Recommended
Response
Action
Make sure that iDRAC is ready and system is functioning properly. Run the
RACADM command "racadm getversion" to list all the servers and make sure the
iDRAC version is displayed. If the iDRAC is listed as Not Ready then wait until iDRAC
is ready for use. A Virtual Reseat may be required.
Category Configuration (SWC = Software Config)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC ✔
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
SWC8618
Message Server Profiles: request arg1 for server in slot arg2 was unsuccessful. Message ID
arg3 . Returned fault: arg4 .
Arguments arg1 = wsman method, arg2 = slot number, arg3 = message id, arg4 = wsman fault
Detailed
Description
The request for the WS-Man method identified in the message for server in slot
identified slot is unsuccessful.
Recommended
Response
Action
Make sure that iDRAC is ready and system is functioning correctly. run the
RACADM command at the command line interface (CLI), "racadm getversion" to list
all the servers and make sure that the iDRAC version is displayed. If the iDRAC is
listed as Not Ready then wait until it becomes ready. A Virtual Reseat may be
required.
Category Configuration (SWC = Software Config)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC ✔
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
1912