Reference Guide

SWC4011
Message A firmware or software incompatibility is automatically corrected between the arg1
arg2 in Server- arg3 and the Chassis Management Controller (CMC).
Arguments arg1 = network device name, arg2 = network device location, arg3 = server
location
Detailed
Description
A firmware or software incompatibility was automatically corrected between the
network device in the Server identified in the message and the Chassis
Management Controller (CMC).
Recommended
Response
Action
No response action is required.
Category System Health (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SWC4012
Message A firmware or software incompatibility is detected between arg1 arg2 and arg3
arg4 .
Arguments arg1 = first component name, arg2 = first component location, arg3 = second
component name, arg4 = second component location
Detailed
Description
The system has detected a firmware or software incompatibility between the
components identified in the message. A mismatch between component versions
may cause the system to not function appropriately.
Recommended
Response
Action
Update the firmware or software of the components identified in the message. For
information about the identified components, see the product documentation
available at the service provider support site.
Category System Health (SWC = Software Config)
Severity Severity 1 (Critical)
Trap/EventID 2337
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔ ✔
CMC ✔ ✔ ✔
1873