Reference Guide

SWC0701
Message Power capping is enabled.
Detailed
Description
Power capping is enabled and sets user-defined power capping limits for the
system.
Recommended
Response
Action
No response action is required.
Category Configuration (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SWC0702
Message Power capping is disabled.
Detailed
Description
Power capping is disabled and sets recommended limits for the system.
Recommended
Response
Action
No response action is required.
Category Configuration (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SWC0717
Message iDRAC Local Configuration is disabled. iDRAC Settings are accessed in read-only
mode.
Detailed
Description
For security reasons, the local configuration is disabled. Enable local configuration
from the iDRAC Web interface
Recommended
Response
Action
Enable iDRAC local configuration from iDRAC Web interface.
Category Configuration (SWC = Software Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
1854