Reference Guide

SWC0282
Message The specified object is READ ONLY for this index and cannot be modified.
Detailed
Description
The value being modified is READ only.
Recommended
Response
Action
No response action is required.
Category Configuration (SWC = Software Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SWC0283
Message The specified object value is not valid.
Detailed
Description
The value given for the object is not valid.
Recommended
Response
Action
Enter a valid value for the corresponding object.
Category Configuration (SWC = Software Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SWC0284
Message Failed to set the object value. \nPossible reason may be that Local Configuration
using RACADM is disabled.
Detailed
Description
Local Configuration using RACADM may be disabled.
Recommended
Response
Action
Check if the Local Configuration using RACADM is disabled and enable it through
GUI.
Category Configuration (SWC = Software Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
1839