Reference Guide

SWC0261
Message The specified option is not supported with the interface being used.
Detailed
Description
The option requested is not available on the interface being used.
Recommended
Response
Action
Refer to the help to get the list of commands/options valid for the interface.
Category Configuration (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SWC0262
Message Unable to perform operation. Please make sure RAC controller and \nappropriate
IPMI drivers are installed.
Detailed
Description
The IPMI drivers or the RAC contorller may not be installed.
Recommended
Response
Action
Check if the required modules are installed.
Category Configuration (SWC = Software Config)
Severity Severity 1 (Critical)
No alerts are applicable for this message
SWC0263
Message Specified path is too long.
Detailed
Description
The length of path to the firmware image is longer than the specified value.
Recommended
Response
Action
Enter a shorter path to the firmware image file.
Category Configuration (SWC = Software Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
1832