Reference Guide

SWC0252
Message No options were specified. The subcommand requires options to be used.
Detailed
Description
Invalid number of arguments were passed to the command.
Recommended
Response
Action
Refer the help text for the command, and enter the required parameters.
Category Configuration (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SWC0253
Message Unable to allocate memory needed to perform operation.
Detailed
Description
Unable to allocate memory to perform the operation, see the inserted comment.
Recommended
Response
Action
Power Cycle the system and re-enter the command.
Category Configuration (SWC = Software Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SWC0254
Message Unable to perform requested operation. \nIf the operation attempted was to
configure DRAC, possible reason may be that \nLocal Configuration using
RACADM is disabled.
Detailed
Description
Local Configuration using RACADM may be disabled.
Recommended
Response
Action
Check if the Local Configuration using RACADM is disabled and enable it through
GUI.
Category Configuration (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
1829