Reference Guide

SWC0225
Message Invalid syntax. The -d option is not valid with -l.
Detailed
Description
The syntax of the command is incorrect.
Recommended
Response
Action
Refer to the help for remote image command.
Category Configuration (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SWC0226
Message No valid directory service certificate exists
Detailed
Description
The Remote/Firmware racadm did not find any AD/LDAP certificate at specified
path.
Recommended
Response
Action
No response action is required.
Category Configuration (SWC = Software Config)
Severity Severity 1 (Critical)
No alerts are applicable for this message
SWC0227
Message Partition label exceeds maximum limit of 6 alphanumeric characters.
Detailed
Description
Invalid values passed to the function.
Recommended
Response
Action
Enter a shorter path to the firmware image file.
Category Configuration (SWC = Software Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
1820