Reference Guide

SWC0105
Message Invalid -m option. Try --more or refer help for proper usage
Detailed
Description
The command does not take in the -m option.
Recommended
Response
Action
Refer the help text for getraclog command.
Category Configuration (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SWC0106
Message The -u option is not supported on the current RAC configuration.
Detailed
Description
The specified option is not supported on the RAC.
Recommended
Response
Action
No response action is required.
Category Configuration (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SWC0107
Message More than one option is not allowed with this command.
Detailed
Description
The command takes in only one option which is the Session ID.
Recommended
Response
Action
Enter the command only with one option i.e. the Session ID
Category Configuration (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
1793