Reference Guide

SWC0004
Message Unable to add a work note to the Lifecycle Log.
Detailed
Description
The operation to add a work note to the Lifecycle Log encountered an unexpected
error while communicating with iDRAC.
Recommended
Response
Action
Retry the operation. If the problem persists: 1) Turn off the system and disconnect
the power cord. 2) Wait for five seconds. 3) Reconnect the power cord, turn on the
system, and retry the operation.
Category Configuration (SWC = Software Config)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
SWC0005
Message Unable to display the current hardware inventory.
Detailed
Description
The view current hardware inventory operation encountered an unexpected error
while communicating with iDRAC.
Recommended
Response
Action
Retry the operation. If the problem persists: 1) Turn off the system and disconnect
the power cord. 2) Wait for five seconds. 3) Reconnect the power cord, turn on the
system, and retry the operation.
Category Configuration (SWC = Software Config)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
1755