Reference Guide

SUP018
Message Invalid until time.
Detailed
Description
The specified until time is invalid.
Recommended
Response
Action
Until Time should be in the form YYYYMMDDHHMMSS. Verify the specified until
time and retry the action.
Category Updates (SUP = FW Update Job)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SUP019
Message Lifecycle Controller is not enabled.
Detailed
Description
For 11G systems: System Services must be enabled to perform the requested
operation. System Services has been disabled through the iDRAC configuration
utility accessed by pressing CTRL+E on boot up or through a remote operation. For
12G systems: Lifecycle Controller must be enabled to perform the requested
operation. Lifecycle Controller has been disabled by pressing F2 Setup, selecting
iDRAC Configuration, and selecting Lifecycle Controller Settings on boot up or
through a remote operation.
Recommended
Response
Action
For 11G systems: Use the iDRAC configuration utility to enable the System Services
by pressing on the CTRL+E option on boot up at the targeted system. For 12G
systems: Use F2 Setup, select iDRAC Configuration, and select Lifecycle Controller
Settings, to enable the Lifecycle Controller on boot up of the targeted system.
Category Updates (SUP = FW Update Job)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SUP020
Message The specified job was deleted
Detailed
Description
The specified job was successfully deleted from the job queue.
Recommended
Response
Action
No response action is required.
Category Updates (SUP = FW Update Job)
1725