Reference Guide

STOR301
Message Unable to perform the operation because the controller mode change request is
pending.
Detailed
Description
The requested operation could not be completed because there is an operation
pending to change the controller mode. This operation is exclusive because it
requires a server reboot for changes to apply..
Recommended
Response
Action
Do one of the following: 1) Create a job to complete the pending controller mode
change request operation, allow the job to complete, restart the server, and then
retry the operation. 2) Cancel any pending operations on the RAID controller, and
then retry the operation.
Category Configuration (STOR = Storage)
Severity Severity 2 (Warning)
No alerts are applicable for this message
STOR302
Message Unable to create the job because the Apply Operation Mode selected is not
supported for this operation.
Detailed
Description
The job could not be created because the Apply Operation Mode selected is not
supported for this operation.
Recommended
Response
Action
Choose a different Apply Operation mode "Apply at Next Reboot" from the Apply
Operation Mode drop-down menu.
Category Configuration (STOR = Storage)
Severity Severity 1 (Critical)
No alerts are applicable for this message
STOR303
Message Unable to change controller mode while foreign configuration is present on the
controller.
Detailed
Description
Controller mode cannot be changed as the controller has foreign configuration
associated with it.
Recommended
Response
Action
Clear the foreign configuration and retry the operation.
Category Configuration (STOR = Storage)
Severity Severity 2 (Warning)
1702